Bibliothèque de l'Ecole Nationale Supérieure des Travaux Publics - Francis Jeanson "BENSTP-FJ"
Auteur J. N. Reddy
Documents disponibles écrits par cet auteur (5)
Interroger des sources externes
| Titre : |
Mécanique des milieux continus : introduction aux principes et applications |
| Type de document : |
texte imprimé |
| Auteurs : |
J. N. Reddy ; Anna Cuprjak, Traducteur |
| Editeur : |
Bruxelles : De Boeck |
| Année de publication : |
2013 |
| Collection : |
Sciences de l'ingénieur |
| Importance : |
263 p. |
| Présentation : |
ill. |
| Format : |
24 cm |
| ISBN/ISSN/EAN : |
978-2-8041-7555-9 |
| Note générale : |
Trad. de : "Principles of continuum mechanics. A study of conservation principles with applications" .
Bibliogr. Index. |
| Langues : |
Français (fre) |
| Mots-clés : |
Milieux continus, Mécanique des;Mécanique des milieux continus;Champs vectoriels;Déformations (mécanique);Transfert d'énergie |
| Résumé : |
Ce livre présente une introduction à la physique des milieux continus et à ses applications dans des domaines aussi variés que le transfert thermique, la mécanique des fluides ou l'élasticité.
Sommaire : Vecteurs et Tenseurs - Cinématique d'un milieu continu - Vecteurs contrainte et tenseurs des contraintes - Conservation de la masse, de la quantité de mouvement et de l'énergie - Equations constitutives - Applications en transfert thermique, mécanique des fluides et mécanique des solides - Eléments de correction. |
Mécanique des milieux continus : introduction aux principes et applications [texte imprimé] / J. N. Reddy ; Anna Cuprjak, Traducteur . - Bruxelles : De Boeck, 2013 . - 263 p. : ill. ; 24 cm. - ( Sciences de l'ingénieur) . ISBN : 978-2-8041-7555-9 Trad. de : "Principles of continuum mechanics. A study of conservation principles with applications" .
Bibliogr. Index. Langues : Français ( fre)
| Mots-clés : |
Milieux continus, Mécanique des;Mécanique des milieux continus;Champs vectoriels;Déformations (mécanique);Transfert d'énergie |
| Résumé : |
Ce livre présente une introduction à la physique des milieux continus et à ses applications dans des domaines aussi variés que le transfert thermique, la mécanique des fluides ou l'élasticité.
Sommaire : Vecteurs et Tenseurs - Cinématique d'un milieu continu - Vecteurs contrainte et tenseurs des contraintes - Conservation de la masse, de la quantité de mouvement et de l'énergie - Equations constitutives - Applications en transfert thermique, mécanique des fluides et mécanique des solides - Eléments de correction. |
|  |
Exemplaires(0)
| Titre : |
Mechanics of solids and structures |
| Type de document : |
texte imprimé |
| Auteurs : |
Roger T. Fenner ; J. N. Reddy, Auteur |
| Mention d'édition : |
2nd ed |
| Editeur : |
Boca Raton : CRC Press |
| Année de publication : |
2012 |
| Autre Editeur : |
London : Taylor and Francis |
| Collection : |
CRC series in computational mechanics and applied analysis |
| Importance : |
683 p. |
| Présentation : |
ill. |
| Format : |
26 cm |
| ISBN/ISSN/EAN : |
978-1-4398-5814-1 |
| Note générale : |
Bibliogr. Index. |
| Langues : |
Anglais (eng) |
| Mots-clés : |
Strength of materials;Solids;Structural engineering;Mechanics, Applied;Mechanics of solids;Constructions, Théorie des;Résistance des matériaux;Mécanique appliquée |
| Résumé : |
A revision of a popular textbook, this volume emphasizes the development of analysis techniques from basic principles for a broad range of practical problems, including simple structures, pressure vessels, beams and shafts. The book integrates numerical and computer techniques with programs for carrying out analyses, facilitating design, and solving the problems found at the end of each chapter. It also presents the underlying theory and traditional manual solution methods along with these techniques. This new second edition covers relationships between stress and strain, torsion, statically determinate systems, instability of struts and columns, and compatibility equations. |
Mechanics of solids and structures [texte imprimé] / Roger T. Fenner ; J. N. Reddy, Auteur . - 2nd ed . - Boca Raton : CRC Press : London : Taylor and Francis, 2012 . - 683 p. : ill. ; 26 cm. - ( CRC series in computational mechanics and applied analysis) . ISBN : 978-1-4398-5814-1 Bibliogr. Index. Langues : Anglais ( eng)
| Mots-clés : |
Strength of materials;Solids;Structural engineering;Mechanics, Applied;Mechanics of solids;Constructions, Théorie des;Résistance des matériaux;Mécanique appliquée |
| Résumé : |
A revision of a popular textbook, this volume emphasizes the development of analysis techniques from basic principles for a broad range of practical problems, including simple structures, pressure vessels, beams and shafts. The book integrates numerical and computer techniques with programs for carrying out analyses, facilitating design, and solving the problems found at the end of each chapter. It also presents the underlying theory and traditional manual solution methods along with these techniques. This new second edition covers relationships between stress and strain, torsion, statically determinate systems, instability of struts and columns, and compatibility equations. |
| |
Exemplaires(0)
| Titre : |
Mechanics of solids and structures |
| Type de document : |
texte imprimé |
| Auteurs : |
Roger T. Fenner ; J. N. Reddy, Auteur |
| Mention d'édition : |
2nd ed |
| Editeur : |
Boca Raton : CRC Press |
| Année de publication : |
2012 |
| Autre Editeur : |
Taylor and Francis |
| Collection : |
CRC series in computational mechanics and applied analysis |
| Importance : |
683 p. |
| Présentation : |
ill. |
| Format : |
27 cm |
| ISBN/ISSN/EAN : |
978-1-4398-5814-1 |
| Note générale : |
Bibliogr. Index. |
| Langues : |
Anglais (eng) |
| Mots-clés : |
Ingénierie structurelle;La résistance des matériaux;solides;Mécanique appliquée;Mécanique des solides;Structural engineering;Strength of materials;Solids;Mechanics applied;Mechanics of solids |
| Résumé : |
This volume emphasizes the development of analysis techniques from basic principles for a broad range of practical problems, including simple structures, pressure vessels, beams and shafts. The book integrates numerical and computer techniques with programs for carrying out analyses, facilitating design, and solving the problems found at the end of each chapter. It also presents the underlying theory and traditional manual solution methods along with these techniques. This new second edition covers relationships between stress and strain, torsion, statically determinate systems, instability of struts and columns, and compatibility equations. |
| |
Exemplaires(0)
| Titre : |
Mechanics of solids and structures |
| Type de document : |
texte imprimé |
| Auteurs : |
Roger T. Fenner ; J. N. Reddy, Auteur |
| Mention d'édition : |
2nd ed |
| Editeur : |
Boca Raton : CRC Press |
| Année de publication : |
2012 |
| Autre Editeur : |
Taylor and Francis Group |
| Collection : |
Computational mechanics and applied analysis |
| Importance : |
683 p. |
| Présentation : |
ill. |
| Format : |
27 cm |
| ISBN/ISSN/EAN : |
978-1-4398-5814-1 |
| Note générale : |
Bibliogr. Index. |
| Langues : |
Anglais (eng) |
| Mots-clés : |
Solides;Résistance des matériaux;Théorie des constructions;Mécanique appliquée;Mécanique des solides;Solids;Strength of materials;Structural engineering;Mechanics, Applied;Mechanics of solids |
| Résumé : |
This volume emphasizes the development of analysis techniques from basic principles for a broad range of practical problems, including simple structures, pressure vessels, beams and shafts. The book integrates numerical and computer techniques with programs for carrying out analyses, facilitating design, and solving the problems found at the end of each chapter. It also presents the underlying theory and traditional manual solution methods along with these techniques. This second edition covers relationships between stress and strain, torsion, statically determinate systems, instability of struts and columns, and compatibility equations. |
Mechanics of solids and structures [texte imprimé] / Roger T. Fenner ; J. N. Reddy, Auteur . - 2nd ed . - Boca Raton : CRC Press : Taylor and Francis Group, 2012 . - 683 p. : ill. ; 27 cm. - ( Computational mechanics and applied analysis) . ISBN : 978-1-4398-5814-1 Bibliogr. Index. Langues : Anglais ( eng)
| Mots-clés : |
Solides;Résistance des matériaux;Théorie des constructions;Mécanique appliquée;Mécanique des solides;Solids;Strength of materials;Structural engineering;Mechanics, Applied;Mechanics of solids |
| Résumé : |
This volume emphasizes the development of analysis techniques from basic principles for a broad range of practical problems, including simple structures, pressure vessels, beams and shafts. The book integrates numerical and computer techniques with programs for carrying out analyses, facilitating design, and solving the problems found at the end of each chapter. It also presents the underlying theory and traditional manual solution methods along with these techniques. This second edition covers relationships between stress and strain, torsion, statically determinate systems, instability of struts and columns, and compatibility equations. |
| |
Exemplaires(0)
| Titre : |
Theory and analysis of elastic plates and shells |
| Type de document : |
texte imprimé |
| Auteurs : |
J. N. Reddy, Auteur |
| Mention d'édition : |
2nd ed. |
| Editeur : |
Baca Raton : CRC Press |
| Année de publication : |
2007 |
| Collection : |
Series in systems and control |
| Importance : |
547 p. |
| Présentation : |
ill. |
| Format : |
26 cm |
| ISBN/ISSN/EAN : |
978-0-8493-8415-8 |
| Note générale : |
Bibliogr. p. 531-541. Index. |
| Langues : |
Anglais (eng) |
| Mots-clés : |
Plaques et coques élastiques; Mécanique des matériaux; Stabilité des constructions; Mécanique des structures; Elastic plates and shells |
| Résumé : |
This book presents a treatment of classical and shear deformation plates and shells, from the basic derivation of theories to analytical and numerical solutions. It provides material on the theory and analysis of shells, featuring an additional chapter devoted to the topic.
Contents : Vectors, tensors, and equations of elasticity. Energy principles and variational methods. Classical theory of plates. Analysis of plate strips. Analysis of circular plates. Bending of simply supported rectangular plates. Bending of rectangular plates with various boundary conditions. General buckling of rectangular plates. Dynamic analysis of rectangular plates. Shear deformation plate theories. Theory and analysis of shells. Finite element analysis of plates. |
Theory and analysis of elastic plates and shells [texte imprimé] / J. N. Reddy, Auteur . - 2nd ed. . - Baca Raton : CRC Press, 2007 . - 547 p. : ill. ; 26 cm. - ( Series in systems and control) . ISBN : 978-0-8493-8415-8 Bibliogr. p. 531-541. Index. Langues : Anglais ( eng)
| Mots-clés : |
Plaques et coques élastiques; Mécanique des matériaux; Stabilité des constructions; Mécanique des structures; Elastic plates and shells |
| Résumé : |
This book presents a treatment of classical and shear deformation plates and shells, from the basic derivation of theories to analytical and numerical solutions. It provides material on the theory and analysis of shells, featuring an additional chapter devoted to the topic.
Contents : Vectors, tensors, and equations of elasticity. Energy principles and variational methods. Classical theory of plates. Analysis of plate strips. Analysis of circular plates. Bending of simply supported rectangular plates. Bending of rectangular plates with various boundary conditions. General buckling of rectangular plates. Dynamic analysis of rectangular plates. Shear deformation plate theories. Theory and analysis of shells. Finite element analysis of plates. |
| |
Exemplaires(1)
|
37894/07
|
B566 |
Livre |
Bibliothèque principale |
Calcul des constructions. Sollicitations
|
Exclu du prêt |
